RICHARD WEDLERS U.S. PAT.# 5,299,609
Free Downloads
Router Model Reference Chart
| HOW TO PLACE AN ORDER:
Within the United States, Canada, and all countries except United Kingdom: Within the United Kingdom: Please make sure to include a valid daytime telephone number with your order. Please note that your order is not |
||||
|
|
||||
|
BROWSE OUR CATALOG:
Edge-Guide & Circle Jig |
||||
 |
Our 2006 System Overview DVD |
FREE
|
||
| A 37 minute visit at the shop where Micro Fence was developed with its inventor Richard Wedler. Call 1.800.480.6427 to order, or pickup a copy at our booth. (See Show Schedule) | ||||
|
|
||||
 |
Micro Fence Complete (MFC): (Specify router model) ........................ | $199.95 | ||
|
Includes our basic micrometer edge-guide unit, 7" & 12" stainless steel guide shafts, (interchangeable), both shallow and deep-profile wood sub-fences, half round inserts for curved and circular work, extension spacers for fence placement at or beyond center collet, our decimal equivalency chart and the appropriate mounting bar, pins and screws to fit your router. Each MFC also comes with a twelve-page instructional booklet and your choice of a informational CD or Video. Use our Router Reference Chart to order the correct model to fit your router. |
||||
|
|
||||
 |
Circle Jig Complete (CJC): (Specify router model) .............................. | $199.95 | ||
| Our Circle Jig Complete has its own micrometer dial. (This is a separate tool and does not include the Micro Fence Edge-Guide). Includes two pairs of 12" guide shafts, the appropriate mounting bar, pins and screws to fit your router. Each CJC also comes with an aluminum straight-line sub-fence for parallel dadoes, an eight-page instruction booklet , our decimal equivalency chart and your choice of a informational CD or Video. Use our Router Reference Chart to order the correct model to fit your router. Read more info on the Circle Jig. | ||||
|
|
||||
 |
Micro Fence Total Plus: *Best Buy* ............................................. | $399.95 | ||
| The most value & versatility for your $'s. This package includes both our Micro Fence Edge Guide and our Circle Jig Attachment plus our Stabilizer Bar, Stop Collar Set, our Informational DVD or VHS, and your choice of 6" Dial Calipers, a second Mounting Bar, or a laminate trimmer Sub-Base Assembly. A Best Buy that adds maximum versatility to any make or model router! (Save $60) | ||||
|
|
||||
| NEW! | Micro Fence "Portable Three-Axis Mill" (Plunge Base) | $399.95 | ||
 |
The Portable Three-Axis Mill is compatible with all existing Micro Fence products and accepts several brands of laminate trimmer motors. The motor carriage comes bored to fit either the PC 310 or Bosch PR20 without any additional parts. (The Bosch 1608, DeWalt 670, Makita 3707 and RotoZip motors require additional adapter rings). There are also "cup" adapters and collar accessories available to accommodate the Dremel and Proxxon high-speed rotary tools. (See our accessory listings) The package includes our Micro Fence LED light source; clear plastic sub-base that accepts PC template guide bushings; a dust collection kit that has top & bottom hoods, hose adapter and mounting hardware; a pair of Auto-Centering Bearings for mortising operations; the Micro Fence ball-tip allen screwdriver; and the appropriate mounting bar for Micro Fence Edge Guides/Circle Jigs if you already own our system. Get more details on The Portable Three Axis Mill We're offering a substantial discount on the original Micro Fence Edge Guide when purchased with the Portable Three Axis Mill. The MFC package for whatever router you choose can be added to the Plunge Base for $149.95). If you've been putting off the decision to get into the Micro Fence System, here's a rare opportunity to do so at a $50 discount! |
$549.95 |
||
|
|
||||
| NEW! | Accessories for the "Portable Three-Axis Mill" (Plunge Base) | |||
|
Adapter Rings for Bosch 1608; DeWalt 670, Makita 3703 or RotoZip |
$39.95 $49.95 $19.95 $19.95 $15.95 |
|||
|
|
||||
| NEW! | LED Light Sources | $15.95 | ||
 |
There are four different locations on our plunge base where this light can be mounted and there are occasions when adding an additional one can solve shadow problems. These nifty little gems are also great on the bill of your cap or on your keychain. Spare batteries (4-pack) View the list of all the LED lights we carry. |
$11.90 |
||
|
|
||||
| ELLIPSE JIG PACKAGES: (Require the Micro Fence Circle Jig) | ||||
 |
Standard Ellipse Package ............................................................... | $219.95 | ||
| Includes either the Standard Axes Plate, Universal Router Base Plate, (which accepts any router); Riser Block Assembly, Mounting Posts, the Model A Mounting Bar, two stainless steel Center Posts and Dovetailed Slides, Stabilizer Bar and instruction booklet. (Check size specifications for major and minor axes limitations). Read more info on the Ellipse Jig. With the Circle Jig Complete (Specify Router. Does Not Include the Edge-Guide) (Save $40) |
|
|||
|
|
||||
 |
Large Ellipse Package: (Standard Ellipse + 48PKG) .............................. | $429.95 | ||
| This package increases the range and versatility of our Ellipse Jig. It includes everything in the Standard Ellipse Package plus a set of four 48" Axes Tracks, a pair of Large Dovetailed Slides and two pairs of longer guide shafts (24" and 36"). These items make up the 48PKG and are shipped in a separate tube. If you purchase the Standard Ellipse Package the 48PKG can be added at any time. Read more info on the Ellipse Jig. With the Circle Jig Complete (Specify Router. Does Not Include the Edge-Guide) (Save $50) |
|
|||
|
|
||||
| PROFESSIONAL PACKAGES: (Incl. the Portable Three-Axis Mill) | ||||
|
Micro Fence Complete or Circle Jig Complete with Portable Three-Axis Mill: | $549.95 | ||
| This combination gives you machine-tool measurement in both vertical and horizontal axes. The MFC or CJC comes with the appropriate mounting bar to fit the Portable Three-Axis Mill. The Plunge base can be ordered with either PC310 or Bosch PR20 bore (adapters can be added for other laminate trimmer motors). Best Buy! Save $50 |
||||
|
|
||||
|
Micro Fence Professional Plus: .................................................... | $799.95 | ||
| A more complete package including the Micro Fence Edge Guide, the Circle Jig Attachment, the Portable Three-Axis Mill, the Center Bar & Outboard Levelers Kit, the Stop Collar Set, the Stabilizer Bar, our Informational DVD, Dry Lube Spray, and your choice of either 6" Dial Calipers, a second mounting bar for another router, or a laminate trimmer Sub-Base Assembly. Best Buy! Save $113 |
||||
|
|
||||
| FULL SYSTEM PACKAGES: | ||||
|
The Entire Micro Fence System #1: (with Standard Ellipse Jig) ............... |
$1569.95 |
||
| All the major components of the Micro Fence Edge Guide System as listed in the Professional Plus, along with our Vacuum Center Assembly, Tru-Grip Slide or Festo Slide, Standard Ellipse Jig and the Ellipse Vacuum Kit. Includes our newest accessories The Off-Fence Mortising Kit , Stop Clamps and Dry Lube maintenance spray. (Entire System Packages do not include other brand name products shown on this site, e.g. Tru-Grip Clamps., Onsrud router bits, etc.) (Save $103) | ||||
|
|
||||
|
The Entire Micro Fence System #2: (with Large Ellipse Jig) ................... |
$1749.95 |
||
|
Same as Entire System #1 above but with the Large Ellipse Package. (Entire System Packages do not include other brand name products shown on this site, e.g. Tru-Grip Clamps.) Best Buy! (Save $152) |
||||
|
|
||||
| ACCESSORIES: | ||||
 |
Circle Jig Attachment (CJA): ......................................................... | $ 159.95 | ||
| Expands versatility of your Micro Fence Edge Guide for circles, arcs, and parallel dadoes. Comes with aluminum straight-line fence for parallel dadoes and eight-page instruction booklet. | ||||
|
|
||||
 |
Center Pin Sleeve: ......................................................... | $ 9.95 | ||
| This stainless steel flanged insert provides a durable and precise center position when jigging up for cutting repetetive radii...e.g. curved door and window casings, cabinet bonnets, curved components for shelving units, mirror frames, etc. See the large radii set-up photos on the Circle Jig page.
It fits comfortably into a 1/4" hole and eliminates any wear factor that might compromise results. |
||||
|
|
||||
 |
Stop Collar Set: ............................................................................... | $ 29.95 | ||
| Four precision machined brass collars with nylon-tipped set-screws for pre-setting or "memorizing" cutter positions. | ||||
|
|
||||
 |
Stabilizer Bars: ................................................................................ | $ 29.95 | ||
| Aluminum clamping device provides additional rigidity with our Circle or Ellipse Jigs for heavier cuts or longer extensions. (With wing-nuts). | ||||
|
|
||||
 |
Stabilizer Leveler: ................................................................................ | $ 29.95 | pr | |
| We've modified the brackets that have been part of our Center Bar and Leveler Kit for several years with an elongated slot so that they can be installed on the under side our Stabilizer Bars.
When cutting large radii, (more than 3'), they allow vertically adjustable support for the stainless steel rods of the Circle or Ellipse Jigs. They're sold in pairs.See the large radii set-up photos on the Circle Jig page. |
||||
|
|
||||
 |
Digital Dial Calipers: ........................................................................ | $ 69.95 | ||
| Six inch; Stainless steel; inch/metric readout with push-button zeroing and .0005" resolution. Powered by a common and easily replaced watch battery (#361). Foam-lined case included. | ||||
|
|
||||
 |
Dial Calipers: ................................................................................... | $ 34.95 | ||
| Six inch; brushed stainless steel with black face dial, measuring in thousandths (with foam-lined case). | ||||
|
|
||||
 |
Sub-Base Assemblies: (Specify trimmer make and model) ................... | $ 34.95 | ||
| Sub-bases for laminate trimmers with mounting posts that provide points of attachment for Micro Fence. Choose the appropriate model from the Router Reference Chart to fit your trimmer (All sub-bases require Model "A" Mounting Bar). |
New lower price!
|
|||
|
|
||||
 |
Center Bar & Outboard Levelers Kit: ................................................. | $39.95 | ||
| The Center Bar & Outboard Levelers Kit can be used with the Micro Fence Edge Guide to cut small circles. (Our Circle Jig covers 6" to 48" plus). A Center Bar attaches to the edge guide and provides a center pin that can be positioned as close as ½" from the bit. | ||||
|
|
||||
 |
The Off-Fence Mortising Kit ................................................... | $89.95 | ||
| Our new Off-Fence Mortising Kit includes the new version of our Universal Router Plate, which is drilled and tapped to accept our aluminum "Off-Fence". The kit comes with all washers, knobs and hardware to provide set-ups for a wide variety of mortising operations. Any router can be mounted on the Universal Router Plate. Each Kit includes an aluminum- machined centering hub that aids in positioning your router's sub-base to use as a template when drilling the mounting holes for your router. (The hub is sized to accommodate the most popular template guide bushing size, 1.375"). Call us at 1.800.480.6427 regarding requirements for specific routers. You have the option of drilling the plate yourself, or of ordering the plate pre-drilled at the factory for your specific router (Micro Fence offers this service for $25). Read more info on the Off-Fence Mortising Kit. If you already have the Universal Router Plate (used with our Ellipse andClamp Interface Packages) then you'll need only the aluminum Off-Fence and appropriate hardware. |
$29.95 $15.95 |
|||
|
|
||||
 |
Stop Clamp Kit (Set of four)............................................................ | $79.95 | ||
| The Stop Clamps are available individually, in pairs, or in a set of four (called the Stop Clamp Kit which includes a pair of each size). To read more about the Stop Clamps, click here. Small Pair (0" - 1 3/16") |
$39.95 $44.95 |
|||
|
|
||||
 |
Circle Jig Vacuum Center: ............................... | $229.95 | ||
| Our venturi valve-operated center assembly for circles with no center hole. | ||||
|
|
||||
 |
EllipseVacuum Kit: ........................................................................... | $89.95 | ||
| Our Vacuum Center Assembly (VCA) can be used as a remote generator to hold the Standard Ellipse Plate (new version) in position. The kit comes with a platform for the VCA, connectors, vacuum tubing, and the necessary gaskets you"ll need to convert your Ellipse Jig to a vacuum hold-down.
Note: This accessory is for use with the Standard Ellipse Plate, (not with the 48" Axes Tracks.) |
||||
|
|
||||
 |
Large Ellipse Axes Track: (48" Dovetail Tracks) ............................ |
$ 39.95 | ea | |
|
These 2" axes tracks come in 4 foot lengths and are mitered at both ends and can be cut down to satisfy your job requirements. A set of tracks are included with the Large Ellipse Package, but they can also be purchased separately. They are pre-drilled for screw attachment to your work surface. |
||||
|
|
||||
 |
Large Dovetail Slides: (for use with Dovetail Tracks) .......................... | $ 24.95 | pr | |
| A larger version of the standard dovetail slides that normally come with the Standard Ellipse Package. They provide a larger "footprint" and increased stability when used to slide in the 48" Axes Tracks. (They are included with the Large Ellipse Package) | ||||
|
|
||||
| 24" Guide Shafts: .......................................................................... | $ 39.95 | pr | ||
|
|
||||
| 36" Guide Shafts: .......................................................................... | $ 49.95 | pr | ||
|
|
||||
| 48PKG (The previous 4 items purchased as a package) ............. | $229.95 | |||
| A set of four 48" Axes Tracks, a pair of Large Dovetailed Slides and two pairs of longer guide shafts (24" and 36"). This package increases the range and versatility of your Standard Ellipse Package. | ||||
|
|
||||
 |
Mounting Bars: (When purchased seperately to fit additional routers).............. | $ 39.95 | ||
| Allows Micro Fence to be used on additional routers. Check our Router Reference Chart to determine the correct model to fit your router. | ||||
|
|
||||
 |
Mounting Bars (Oversized):......................................................... | $44.95 | ||
|
The routers listed here require oversized mounting bars. Please specify router make and model when ordering. Bosch 1619; Porter Cable 7518 & 19, 7529, 7538, & 39; Fein RT1800, Festool OF1000E, OF1400, OF2000E. |
||||
|
|
||||
 |
The Warner Offset Router Base Adapter Kit: ............................ | $29.95 | ||
| Pat Warner's offset base provides increased stability for many routing applications. The Micro Fence Edge Guide can be dropped down lower to clear the additional thickness of these bases. This adapter kit can accommodate the Warner Base, (or similar bases), for any model Micro Fence. | ||||
|
|
||||
 |
Metric Conversion Kit: .................................................................. | $59.95 | ||
| A spindle and dial assembly that converts any Micro Fence Edge Guide or Circle Jig to metric measurement. Calibrated in tenths of a millimeter. One full revolution of the dial equals 1mm. | ||||
|
|
||||
 |
Universal Router Plate Assembly: ............................................. | $59.95 | ||
| This new kit will allow any router to be fitted with the Micro Fence System. Even routers that have no holes for an edge guide can be accommodated.
Any router can be mounted on our plate, (you have the option of installing it yourself or having the plate pre-drilled at the factory, specifically for your router for an additional $25 machining charge). This kit requires the Model A Mounting Bar (not included). |
||||
|
|
||||
 |
Tru-Grip UHMW Slide: (clamp not included).................................... | $ 24.95 | ||
| If you already have our Circle Jig and Ellipse Jig (which includes the Universal Router Plate and Mounting A Mounting Bar), you already have most of what you need to fit your Circle Jig to the Tru Grip Pro Ft'r clamps. This slide mounts on the bottom of the Circle Jig and travels in the Pro Ft'r extrusion for dadoing operations. | ||||
|
|
||||
 |
Tru-Grip Clamp Interface (PKG) (UHMW Slide + Universal Router Plate (w/ Riser Block assembly): ....... |
$ 89.95 | ||
| If you already have our Circle Jig but not the Ellipse Jig, or if you wish to add the Tru-Grip accessory to any other Micro Fence Package. (You will need the Model A Mounting Bar if you don't already have it. Using the Stabilizer Bar (not shown ), with this accessory is recommended for maximum ridgidity). |
||||
|
|
||||
New Accessory |
Festo Slide Interface (PKG): (clamp not included) (UHMW Slide + Universal Router Plate (w/ Riser Block assembly):.... |
$ 89.95 | ||
| If you already have our Circle Jig but not the Ellipse Jig, or if you wish to add the Festool Slide accessory to any other Micro Fence Package. (You will need the Model A Mounting Bar if you don't already have it. Using the Stabilizer Bar (not shown ), with this accessory is recommended for maximum ridgidity). |
||||
|
|
||||
| New Accessory | Festo UHMW Slide: (clamp not included)............................................... | $ 24.95 | ||
| The Festool Guide Rail System works in conjunction with a number of their power tools and comes in lengths varying from 32" to 197" !
We use the same Micro Fence set up, (the front portion of the Circle Jig), that we've used with the Tru-Grip Clamp for years and fit it with a different UHMW slide that fits the Festo rail extrusion. |
||||
|
|
||||
| New Accessory | All-In-One Clamp Interface (PKG): (clamp not included) (UHMW Slide + Universal Router Plate (w/ Riser Block assembly):.... |
$ 89.95 | ||
 |
If you already have our Circle Jig but not the Ellipse Jig, or if you wish to add the All-In-One UHMW Slide accessory to any other Micro Fence Package. (You will need the Model A Mounting Bar if you don't already have it. Using the Stabilizer Bar (not shown ), with this accessory is recommended for maximum ridgidity). | |||
|
|
||||
| New Accessory | All-In-One UHMW Slide: (clamp not included)....................................... | $ 24.95 | ||
| We use the same Micro Fence set up, (the front portion of our Circle Jig), that we've used with the Tru-Grip Clamp for years and fit it with a different UHMW slide that fits the All-In-One clamp extrusion. | ||||
|
|
||||
| New Accessory |
All-In-One Clamps:
|
|||
|
Micro Fence is now carrying the All-In-One Clamps from E.Emerson Tool Co. We now offer these versatile extruded clamps in a variety of models and sizes ranging from 12" to 8'.
|
||||
|
|
||||
|
Single Clamps:
|
||||
 |
The All-In-One straight edge clamp is an obstruction free, extruded aluminum clamp and straight edge. The Single Clamp (A Series) measures 1 3/4" in width with low profile jaws positioned under the clamp that never get in the way. A built in T-Track on the top side allows you to use any router with the Micro Fence All-In-One Clamp Interface. We now stock the following sizes:
12.5" - $31.95 24.5" - $34.95 36.5" - $37.95 50.5" - $39.95 |
|||
|
|
||||
|
Ultra Clamps:
|
||||
 |
Although similar to the A Series above, the Ultra Wide Straight Edge Clamp, (U Series) has some additional features. It is significantly wider, (3 3/4") and it is extremely rigid. This rigidity allows the clamp to be manufactured in the highly desired 8 foot length and includes two T-Tracks on its top face not just one. This is the most durable and robust clamp on the market. We stock the following sizes of the Ultra Clamp:
54.4" - $75.95 99.5" - $140.95 144.5" - $190.95 |
|||
|
|
||||
| New Accessory |
True Position Drill Guide by Precision Casewerk:
|
|||
 |
The True Position Drill Guide System dramatically reduces set-up time for cabinet hardware, providing perfect alignment every time. Position guides and stops along the T-square's inch/metric scales, tighten thumb screws, then the True Position Drill Guide is ready to go! For more information, click here.
|
|||
|
|
||||
| Micro Fence Router Bits made by Onrud Cutter Co. | ||||
 |
We've always recommended the Onsrud Cutters as being as good a cutting tool as you can find made in the US and we were pleased to hear that the folks there had a similar regard for our products. Buy 3 or more router bits and Save 10%. |
|||
|
|
||||
 |
Basic Inlay Bit Kit | $100.95 | ||
| Four solid carbide down-cut spirals (1/16, 1/8, 1/4 & 3/8") designed to shear downward on the top surface of your materials to produce seamless inlay joints. (The 1/16 (HSS, straight flute), 1/8 and 1/4" are 1/4" shank, the 3/8 is 1/2" shank). Normal Retail Price: $112.50 (Save 10%) | ||||
|
|
||||
| Complete Inlay Bit Kit | $389.95 | |||
|
Picture Coming Soon!
|
This kit includes ten solid carbide down-cut spirals, in the following sizes: 1/16, 1/8, 5/32, 3/16, 7/32, & 1/4" (1/4" shank), and 3/8, 7/16, 1/2, & 17/32" (1/2" shank).Normal Retail Price: $441.90 (Save 12%) | |||
|
|
||||
 |
Basic Mortising Bit Kit | $149.95 | ||
| Four solid carbide up-cut spirals to facilitate efficient chip removal from mortise cuts. The kit includes 1/8 and 1/4" diameters with 1/4" shanks and 3/8 and 1/2" with 1/2" shanks. Normal Retail Price: $164.25 (Save 10%) | ||||
|
|
||||
| Complete Mortising Bit Kit | $380.95 | |||
|
Picture Coming Soon!
|
This kit includes nine solid carbide up-cut spirals, in the following sizes: 1/8, 5/32, 3/16, 7/32, & 1/4" (1/4" shank), and 3/8, 7/16, 1/2, & 17/32" (1/2" shank). Normal Retail Price: $433.45 (Save 12%) | |||
|
|
||||
|
Whiteside Machine Co. Router Bits
|
||||
 |
Micro Fence is proud to carry the Whiteside Machine Co. router bits in addition to our great selection of Onsrud bits. Check back often for new additions to our catalog. Proudly made in the USA, and tested #1 by Fine Woodworking Magazine in a head to head router bit test of 17 different brands!
|
|||
|
|
||||
|
Small Fluting Bit Kit
|
$85.95
|
|||
| Picture Coming Soon! |
This kit includes five carbide-tipped bits with a 1/4" shank: 1/8, 3/16, 1/4, 3/8, and 1/2". Impeccably clean cuts for decorative fluting and/or detailing in hardwoods, composites, plastics and solid-surface materials.
|
|||
|
|
||||
|
Large Fluting Bit Kit
|
$169.95
|
|||
| Picture Coming Soon! |
This kit includes three carbide tipped bits with a 1/2" shank: 1/2, 5/8, 3/4, 7/8 and 1". Great for larger architectural details such as fireplace mantels and coopered columns.
|
|||
|
|
||||
|
Complete Fluting Bit Kit
|
$215.95
|
|||
| Picture Coming Soon! |
This kit is a great buy for those who want the full range of sizes. This kit includes a total of eight carbide-tipped bits: 1/8, 3/16, 1/4, and 3/8" (1/4" shank), and 1/2, 5/8, 3/4, 7/8 and 1" (1/2" shank).
|
|||
|
|
||||
|
Whiteside Router Bit Sets in Durable Plastic Cases
|
$110.00
|
|||
|
We are now selling the following kits from Whiteside, which come in a durable plastic red case to keep your bits safe and organized.
|
||||
 |
Basic Router Bit Set
This kit includes the following seven bits, available with both a 1/4" and a 1/2" shank: 1/4" Straight, 1/2" Straight, R3/8 Roundover, 3/8" & 1/2" Rabbet, R3/8 Cove, 45 degree Chamfer, and 1/2" Flush Trim. |
|||
|
|
||||
 |
Roundover & Beading Router Bit Set
This set offers the most common Radii, R1/4, R3/8, plus a hefty 3/4" Radius workhorse. Extra bearings and wrench are included to convert each bit from Roudning over to Beading - i.e., Roundover with a decorative step. Available with in both 1/4" and 1/2" shank. |
|||
|
|
||||
 |
Bi-Focal Safety Glasses: ......................................................... | $ 19.95 | ea | |
|
Specify your diopter preference when ordering. Diopters 1.0, 1.5, 2.0, 2.5, 3.0 Buy 2 or more pairs and save 10% |
||||
|
|
||||
 |
Dry Lube: (10 oz. spray) ....................................................................... | $ 14.95 | ||
| The best spray we've found to clean and lube your Micro Fence as well as any other tool in your shop. | ||||
|
Two-Sided Flat Back Tape: (2" x 36 yards) .......................................... |
$ 14.95 |
|||
| A 2" x 36 yard roll of flat backed , two-sided tape for holding down our Ellipse Axes Plates or anything else in your shop. The backing is 8 mil & its shear strength is remarkable. | ||||
|
|
||||
New Accessory |
Phil Tenacious Oil (4oz. bottle) ..................................................................... |
$ 9.95 |
||
| We've been lubricating our spindle assemblies with Phil Tenacious oil since we started selling Micro Fence back in 1993. We still haven't found anything better to keep the micrometer turning with a silky feel without being a "dust magnet". This specially formulated bicycle oil tends to stay in the location where it's applied. Available from us in either the 4oz. or 5cc size bottle...good for a myriad of applications in the workshop. | ||||
|
|
||||
 |
Detailed Plans for Micro Fence Cabinet .......................................... | $9.95 | ||
| Dan designed this cabinet to fit his entire Micro Fence Edge Guide System in one place. Click here for more photos.
His detailed CAD drawing plans for this fine box are available from Micro Fence. Call us at 1(800) 480.6427 to order. |
||||