RICHARD WEDLERS U.S. PAT.# 5,299,609
Free Downloads
Router Model Reference Chart
| Router Bits | ||
| Unsuprisingly, one of the most critical factors in successful router operations is the router bit itself. The quality of the cutter and the choice of which bit to use for any given application can make or break your routing experience.
The Micro Fence System covers a pretty wide range of tasks and over the years we've been asked to recommend appropriate bits so many times that we've finally decided to carry some cutters that match up well with the jobs our various jigs address. In addition to the Micro Fence Router Bits made by Onsrud Cutter Co., we are now a distributor of Whiteside Machine Co. Router Bits. See below for more information on both of these high quality router bits. |
 |
Whiteside Machine Co. Router Bits | |
| Micro Fence is now a distri butor of Whiteside Router Bits, which were tested #1 by Fine Woodworking Magazine in a head to head router bit test of 17 different brands. These bits are made from solid alloy steel and use the highest quality American made micrograin carbide. They are precision ground for proper balance at high rpms and have superior edge quality compared to other manufacturers. Below is a listing of the Whiteside Kits we offer. If you do not see what you are looking for, you can call us at 1-800-480-6427 or take a look at the complete Whiteside Catalog, here. For Whiteside Pricing, click here. | ||
|
Small Fluting Bit Kit
|
Large Fluting Bit Kit
|
Complete Fluting Bit Kit
|
| This kit includes five carbide-tipped bits with a 1/4" shank: 1/8, 3/16, 1/4, 5/16, and 3/8". | This kit includes three carbide tipped bits with a 1/2" shank: 1/2, 5/8, and 3/4". |
This kit includes a total of eight carbide-tipped bits: 1/8, 3/16, 1/4, 5/16, and 3/8" (1/4" shank), and 1/2, 5/8, and 3/4" (1/2" shank).
|
 Click to Enlarge |
Whiteside Router Bit Sets in Durable Plastic Cases These foam lined cases keep your bits safe and organized. Basic Router Bit Set
Roundover & Beading Router Bit Set
This set offers the most common Radii, R1/4, R3/8, plus a hefty 3/4" Radius workhorse. Extra bearings and wrench are included to convert each bit from Roudning over to Beading - i.e., Roundover with a decorative step. Available with in both 1/4" and 1/2" shank. |
|
 |
Micro Fence Router Bits made by Onsrud Cutter Co. | |||||
| We've always recommended the Onsrud Cutters as being as good a cutting tool as you can find made in the US and we were pleased to hear that the folks there had a similar regard for our products. Our relationship has led to a private label arrangement for Micro Fence bits to be made by Onsrud.
Below you'll find some cutter categories that will help your Micro Fence operate at peak performance and produce results you'll be able to enjoy and rely on.Click on any of the thumbnail pictures to see the model #'s and sizes that we offer. We can supply a great many other sizes and types of cutters as well, so if you don't find what you're looking for, give us a call at 1-800-480-6427. |
||||||
| Individual Bits | ||||||
 |
 |
 |
 |
|||
| 36-00/50 Carbide Tipped Dovetail |
37-50/60 Carbide V-Bottom |
38-50/60 Carbide Round Bottom |
39-00 Carbide Tipped Dish Carving |
|||
|
|
||||||
 |
 |
 |
 |
|||
| 52-200 Solid Carbide Upcut Spiral Wood Rout |
56-000 Solid Carbide Straight |
56-200 Solid Carbide Straight Wood Rout |
57-200 Solid Carbide Downcut Spiral Wood Rout |
|||
|
|
||||||
 |
 |
 |
 |
|||
| 60-100M Solid Carbide Mortise Compression Spiral |
60-300 Solid Carbide Chipbreaker Finisher |
61-000 Solid Carbide Straight |
90-00 T-Slot |
|||
|
|
||||||
| Router Bit Kits | ||||||
 |
Picture Coming Soon! |  |
Picture Coming Soon! | |||
| Basic Inlay Bit Kit | Complete Inlay Bit Kit | Basic Mortising Bit Kit | Complete Mortising Bit Kit | |||