Edge-Guide Operations: Flutes & Reeds

Edge-Guide System
RICHARD WEDLERS U.S. PAT.# 5,299,609

Micro Fence Photo Gallery
Free Downloads
Router Model Reference Chart

Home

Things You Can Do with the Edge-Guide:

Circle Jig

Ellipse Jig

Bending Forms

Flutes & Reeds

The Micro Fence Edge-Guide, together with our Stop Collar Set, can make fluting and reeding operations which require equally spaced cuts a very simple operation

Odd-numbered groupings require an initial cut to be placed at the center of the workpiece...an initial test cut in same-sized material will indicate how far to adjust the dial to achieve precise centering.

Previous

Next

For even-numbered groupings simple addition of cut and distance between cuts will dictate how far to set stops for a second position cut. This procedure can be repeated as required by the number of flutes or reeds desired.