Things You Can Do with the Edge-Guide:

• Box Hinges
• Door Hinges
• Door Locks
• Inlays
• Flutes & Reeds
• Laminate Trimming
• Drawer Locks
• Shelving Dadoes
• Rabbets & Dadoes
• Picture Frames
• Mortise & Tenon
• Stopped-off Flutes
• Plinth Blocks & Door Casings
• Sliding Dovetails
• Guitar Rosettes
• Drawer Construction

Circle Jig

• Parallel Dadoes
• Curved Cabinet Components
• Curved Bookcase

Ellipse Jig

• Bending Forms

The critical measurement is the hinge leaf dimension. Once checked with dial calipers, this leaf size can be duplicated in the cut made with your router.

Make a test cut in scrap material, measure it and dial the difference to match the leaf size precisely. The depth and width of cut can be checked with the back end of the calipers.

Square cornered hinges as pictured here require the corners of the mortise to be cleaned out with a well-sharpened paring or corner chisel to remove the radius left by the router bit.